Digital Signage
Sound out for CDE models For the CDE5510, CDE6510 and CDE5010 sound outs, you can set the volume to 0 (to disable internal speaker volume) and set the ...
Fri, 19 Apr, 2019 at 5:11 PM
Yes, CDE4302 / CDE4803 / CDE4803-H/CDE 5520 have a clone feature and following is clone SOP setting in the OSD: CDE4302/4803/4803-H/5502 OSD Clone SOP...
Mon, 25 Mar, 2019 at 9:25 AM
Signage Manager software communicates with media players through local area network (LAN). Some network ports on the media player must be enabled for sof...
Fri, 29 Mar, 2019 at 3:47 PM
You are unable to use the ePoster touch function to disable touch, however there is a workaround to move the touch point from the screen to the HDMI input ...
Fri, 19 Apr, 2019 at 5:06 PM
To enable USB playback with the scheduler feature follow the instructions below: 1. Go to Setup in the On-Screen Display (OSD) Menu. 2. Turn Low Po...
Tue, 18 Jun, 2019 at 9:53 AM
Cause This error may be due to any of the following: The computer does not meet the minimum requirements for Signage Manager. The minimum requirements a...
Tue, 13 Aug, 2019 at 2:16 PM
Model Name CDM series CDE10 series CDE20 series EP55 series Supported WiFi Dongle Built-in WiFi module LB-WiFi-001 LB-WiFi-001 TL-WN725N TL-WN725...
Tue, 11 Aug, 2020 at 9:35 AM
Please refer to below table: OS/Model/touch points CDE**61T CDE8452T Win 7 (except Starter and Home Basic) Win 8/8.1/10 20 points touch ...
Mon, 18 Jan, 2021 at 5:08 PM
Here’re major steps to set up video wall in portrait position for your reference. 1. Set up monitor ID in OSD menu as 1~4 prior to mounting monitors. ...
Fri, 12 Mar, 2021 at 10:38 PM
1. Press "INPUT 9 9 1" on remote control to enter Factory Menu. 2. Select DEBUG 3. Change Unknown source setting to ON by using remote c...
Mon, 25 Jun, 2018 at 11:59 AM