How can we help you today?Digital Signage
According EE class A requirement we need to set default from 300-350 nits to 210-245 nits , but it may cause CDE4302 has lower brightness. Here are the...
Thu, 9 Aug, 2018 at 10:24 AM
You can press FORMAT button on RC to change the aspect ratio.
Tue, 28 Aug, 2018 at 9:28 AM
When you use LAN control and RS232 protocols to power on/off CDX5552 Videowall via a LAN network, you need to set the Eco mode to Normal in OSD menu.
Tue, 28 Aug, 2018 at 9:41 AM
Tiling Mode In Tile Mode you can view an image in a larger scale by connecting multiple monitors. After all the displays are installed properly to a vi...
Thu, 6 Sep, 2018 at 2:49 PM
Control Indication Command through RS-232 or LAN should be compliance with the requirement enclosed. Please refer RS232 spec. Its default settings a...
Thu, 6 Sep, 2018 at 2:58 PM
Support HDMI Ver. 1.4b DVI cable can't exceed 5M, otherwise, a DVI extender is required HDMI cable can't exceed 5M, otherwise, a HDMI extender ...
Thu, 6 Sep, 2018 at 3:15 PM
Definition and Usage The <iframe> tag specifies an inline frame. Example An inline frame is marked up as follows: <iframe src="https://...
Thu, 20 Sep, 2018 at 12:11 PM
Please make sure you following the steps. a. The windows admin of vSignage or Signage Manager and CDM displays or Eposters are in same LAN network . F...
Tue, 25 Sep, 2018 at 11:50 AM
You can refer attachment to install Apps.
Thu, 15 Nov, 2018 at 11:35 AM
Upgrade under the factory menu Copy MstarUpgrade.bin in USB and Insert U disk to the USB port Press Input menu and then press 2 5 8 0 to activate factory ...
Fri, 23 Nov, 2018 at 9:22 AM