Interactive Flat Panel
The buttons can be locked by pressing the following front panel buttons in sequence VOL- => VOL- => SETTING => HOME Note: All buttons of fron...
Fri, 11 May, 2018 at 11:15 AM
Yes, IFP7550 integrated a HDMI output port which is capable of being installed by Daisy Chain. For more details, please refer to the User Guide.
Wed, 28 Mar, 2018 at 2:51 PM
What to do if an error message "No signal" appears on my IFP7550 while connecting to an external device?
1. Please check and make sure the correct input source is selected. 2. Do not mix up HDMI 2.0 and HDMI 1.4 input ports as it may lead to a blank screen. 3...
Wed, 28 Mar, 2018 at 3:00 PM
There're two audio output solutions with IFP7550. 1. COAX OUT: When connected a coaxial cable from COAX OUT to an external amplifier, the output...
Wed, 28 Mar, 2018 at 4:46 PM
Please connect an audio cable from AUDIO OUT connector on IFP7550 to external amplifier or active speaker with power adapter. For more details, please r...
Fri, 30 Mar, 2018 at 12:29 PM
How to unlock IFP display as it's locked with an error message "The device has been locked, please use the U disk to unlock"?
USB Lock (system lock) function is under "Debug/Player Setting". There're two methods to unlock when it's locked. 1. Unlock by &quo...
Fri, 26 Jan, 2018 at 6:03 PM
What to do as black screen shows up after powering on my IFP7550 when another display is connected to HDMI output of IFP7550?
Please turn off "Output Encryption" under Embedded Player Display setting.
Wed, 28 Mar, 2018 at 4:53 PM
Both touch module and remote control in IFP7550 are based on IR technology with transmitter and receiver. The IR wave length of touch module is 850nm and 9...
Mon, 9 Apr, 2018 at 3:39 PM
Please download touch driver for Mac from below link or visit product page in our website for more details. http://www.viewsonicglobal.com/public/products_...
Wed, 28 Mar, 2018 at 5:15 PM
Yes, touch function is supported by Windows 7. However, to optimize user experience in digital white boarding, we strongly recommend Windows 10 instead.
Wed, 28 Mar, 2018 at 5:27 PM