How can we help you today?

General Questions

What to do when my projector auto shuts down?
There are some possible reasons caused, please check below first:   <Airflow>        Air Flow is important for cooling:   Please make sure the ...
Sun, 24 Jan, 2021 at 12:16 PM
How to change the projector image orientation
1. To change the image orientation on the projector, check the projector remote for a button that says “My Button” and press it to change image orientation....
Fri, 20 Apr, 2018 at 2:35 PM
How to reset lamp timer
After replacing the Projector Lamp, resetting the lamp timer is highly recommended to help keep track of how long the lamp has been on. The Lamp Timer will ...
Fri, 20 Apr, 2018 at 5:39 PM
The projector fan stays on after the unit has been turned off
On some projector models, the fan will remain on after the unit has been shut down and in standby mode. This is normal operation for any model with the net...
Fri, 20 Apr, 2018 at 12:45 PM
How to adjust the image size on a projector?
  The projector's image size is determined by the distance between the projector itself and the screen.   Moving the projector closer to the screen ...
Sun, 24 Jan, 2021 at 11:47 AM
How to change the projector image orientation
Open the projector Menu and go to System Setting: Basic> Projector Position and choose one of the four available options: Front Table Rear Table Ceil...
Fri, 20 Apr, 2018 at 5:53 PM
How to clean the projector lens
To clean the projector lens, do the following: Apply a non-abrasive camera lens cleaner to a soft, lint-free cloth. Do NOT spray the cleaner directly onto...
Fri, 20 Apr, 2018 at 5:54 PM
The AC adapter for the projector does not work
Verify adapter plugged into a wall outlet Make sure the AC adapter is firmly and securely plugged into the wall outlet.  Although it may sound obvious, th...
Fri, 20 Apr, 2018 at 6:04 PM
How to play 3D content from Blu-Ray player to projectors?
1. Here are the hardware requirements to play 3D content below.     a. 3D ready projector     b. 3D Blu-Ray player     c. 3D content     d. Active 3D gl...
Sat, 15 May, 2021 at 11:03 PM
How to restore the default settings on a projector?
1. Press the menu button on the projector or the remote control and then navigate to the Advanced Settings.   2. Select to restore factory default settin...
Sun, 24 Jan, 2021 at 12:23 PM