LED Modules (either damaged and/or undamaged) should be stored in module boxes according to the following packaging steps when not mounted on the display. If there is a shortage of module boxes, please contact Customer Service.


Please refer to the Proper LED Module Packaging SOP for full details.


Solution


Obtain the Module Box(s). Each module box should be able to hold 4 LED modules. 
NOTE: Flight cases with trolley models will not contain module boxes. Contact Customer Service to obtain module box(s).


Step 1: Place the first set of LED Modules (x2 modules) with the connectors facing down
NOTE: Do not place the LED Module on a surface without an opening for the connector. This may cause the connectors to bend.



Step 2: Place the Bead-side Cover on top of the first set of modules

Step 3: Then, place the second set of LED Modules (x2 modules) with the bead-side facing down


Step 4: Place the Connector-side Cover on top of the first set of modules



Step 5: Secure the box flaps into the provided flap slots



Recommended Links

"How do I properly package DVLED Display LED module(s) for shipping?"