Toggle between "iPad Mode" and "Capacitive Mode" by tapping the top touch sensor of the stylus. The current mode is indicated by the LED color.


Steps:

  1. Locate the Sensor: Find the touch-sensitive area at the tail end (top) of the ACP501.

  2. Tap to Switch: Gently tap the top with your finger to cycle through modes:

    • Green Light (iPad Mode): Designed for iPad series (supports palm rejection).

    • Blue Light (Capacitive Mode): Designed for general capacitive touchscreens (e.g., iPhone, Android devices, or ViewBoard).

  3. Confirm Status: If the LED is off, tap once to wake up the stylus before switching.


Notes:

  • Tip: If the LED flashes red, the battery is low and requires charging.

  • Note: A "gentle tap" is sufficient; applying excessive pressure to the sensor is not necessary and may affect responsiveness.