Interactive Flat Panel
It's a software limitation from MacOS. Please upgrade MacOS to v10.13 or later to solve the issue.
Fri, 30 Mar, 2018 at 4:38 PM
What to do as it shows a warning message “Program not activated, will exit in 30 minutes” when running vBoard?
vBoard will be activated automatically while Internet in connected. Please make sure your IFP display is well connected to Internet.
Fri, 30 Mar, 2018 at 4:44 PM
Check connection and ports, if connected to VGA, USB will be from PC to Touch 1. Disconnect and reconnect the USB cable and make sure that Windows loads ap...
Tue, 24 Apr, 2018 at 10:33 AM
For information on how to configure your touch panel for extended display mode, please refer attachment.
Thu, 3 May, 2018 at 2:01 PM
The Hue and Sharpness settings only for AV source.
Thu, 2 Aug, 2018 at 9:59 AM
No, CDE7061T VGA Out only bypass the signal from VGA in 1 and VGA in 2, the annotation won’t be shown on second display.
Thu, 3 May, 2018 at 9:43 AM
It's highly recommended to install ViewSonic WiFi module "LB-WIFI-001" for better compatibility. Or you can choose other WiFi modules integ...
Thu, 3 May, 2018 at 2:00 PM
Yes, the HDMI out on the IFP7550 will show the annotations on the second display.
Fri, 4 May, 2018 at 7:48 AM
You need to upgrade firmware to 20180403 or later version, you can download firmware from ViewSonic website. After done the firmware upgrade, you need to pr...
Fri, 4 May, 2018 at 10:10 AM
Please refer below steps to unlock. 1. Format the USB drive to FAT32. 2. Unzip Unlock.zip and copy to the USB drive root. 3. Insert the USB to IFP50 USB ...
Fri, 4 May, 2018 at 10:26 AM