How can we help you today?

Digital Sigange

How to update EP5520T firmware?
Before update, plug the USB drive with firmware file copied in the root directory to one USB port of EP5520T . 1. Press remote control input the number ...
Tue, 3 Jul, 2018 at 1:56 PM
Does my e-Poster Support Power Point presentations?
ViewSonic most of e-Posters do not support Power Point Presentations natively. However,  newer models such as EP4320/EP5520/EP5520T have build in the vSigan...
Tue, 24 Apr, 2018 at 9:40 AM
How to solve Signage Manager error “Data Invalid”?
Issue: Files are not loading correctly when using Signage Manager Express Network Edition. I am loading the playlist onto a USB but when am loading it ont...
Tue, 24 Apr, 2018 at 10:09 AM
How to calibrate touch function on EP5012-TL?
Issue:  My touch is not calibrated or working with Windows 10        Solution:   Connect the EP5012-TL to a Windows 7 PC for calibration purposes and ...
Tue, 24 Apr, 2018 at 10:12 AM
What's the Signage Manager newest version? How can I update it?
You can click "Help"-->"Check update" in Tool bar to check is your Signage Manager newest or not, if not, you can click "Downloa...
Tue, 8 May, 2018 at 8:48 AM
How can I use Apps to program EP1042T LED?
You can refer attached file to design App.
Tue, 8 May, 2018 at 3:25 PM
Why my EP5520T touch unstable? I place it near window.
EP5520T uses IR touch module, the sunlight will cause IR touch module abnormal, please place your EP5520T far away from sunlight.
Wed, 9 May, 2018 at 11:10 AM
Does NMP-302w and NMP580-W support touch content?
NMP-302w and NMP580-W support EP5520T touch function, you can use these two models with EP5520T, then you will have touch function.
Mon, 14 May, 2018 at 8:26 AM
How can I exit EP5520T Aging mode?
You can press remote control SNAP to exit.
Mon, 14 May, 2018 at 10:07 AM
The image is distorted from NMP-302w HDMI out, how can I do?
You can refer below steps to check the issue. 1. To reset the NMP-302w. 2. To replace the HDMI(extension) cable. If above steps can't solve the i...
Tue, 15 May, 2018 at 11:02 AM